Your 800mhz ram just turned into 820 mhz RAM. Hence when you increase the FSB by 5mhz you will actually change the ram timings by 10mhz and it will show as a 20mhz difference because of the dual data rate. ![]() For example: If you have a FSB of 200 and then your RAM runs at a frequency of 400mhz then you are running a FSB : DRAM ratio of 1:2. This will make a much larger change in your RAM frequency than 3-5 mhz though because the RAM is on a ratio. You will want to up your base clock or front side bus by very small increments (3-5mhz) at a time. Make sure that you aren't overclocking your cpu further than you want by doing the following steps. We will start by entering in all of the timings and the voltage manually because if they are on auto then the BIOS may change something we don't want it to. ![]() Now that you have noted the highest stock frequency, timings, and voltage of your RAM modules you are ready to overclock. and a voltage of somewhere between 1.8-2.2vĪnother typical set-up is 533mhz (1066mhz Dual Data Rate) with timings of 5-5-5-15-30 with a voltage of 2.0-2.3. Typically most DDR2 modules work at 400mhz (800mhz Dual Data Rate) with timings of 4-4-4-8-16. Take note of the frequency, timings, and voltage.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |